1.

Step 1: Download Version 6 VintageDim® 2 App from Google Play Store.

Capture2.JPG

2.

Step 2: Open the App, and see preset options available:

  1. VintageDim® (Warm Dim Solution) Constant Brightness;

  2. 2 Channel and CCT Intensity, (Tunable White Solution) two control outputs;

  3. 2 channel individual control- (for 3rd party control) Individual Curve Control;

  4. Custom Curve;

Capture.JPG

OPTION 1: VintageDim® – Warm Dim Solution

o1-1.jpg

Step 1: Select “VintageDim®“
factory preset.

o1-2.jpg

Step 2: Press Edit a copy.

o1-3.jpg

Step 3: Change the pre-set name to your custom name.

o1-4.jpg

Step 4: Set limits to CCT Range of Light Source. You must enter the CCT values of your light source.

o1-5.jpg

Step 5: Set warm dim maximum and minimum curve at the bottom of the screen. This calculates the correct curve using the limits you set in this section.

o1-6.jpg

Step 6: Save preset to save the desired scene.

o1-7.jpg

Step 7: Select your new user preset from the main list.

o1-8.jpg

Step 8: Press Program button.

 
 

Step 9: Place phone within 1” of VintageDim® module. Phone will play a tone when programming begins. Programming is complete when you hear a single beep and see the “Programming Successful” screen.

If the driver was off during programming, simply power on and the driver will work according to the new program. If the driver was on during programming it will need to be power cycled for new programming to become active.

program.jpg

* Lid of driver case must be removed.


OPTION 2: Two Channel CCT and Intensity

o2-1.jpg

Step 1: Select “Two Channel - CCT and Intensity“ factory preset.

o2-2.jpg

Step 2: Press Edit a copy.

o2-3.jpg

Step 3: Change the pre-set name to your custom name.

o2-4.jpg

Step 4: Set limits to CCT Range of Light Source. You must enter the CCT values of your light source.

o2-5.jpg

Step 5: Set values:
Value 1 - Intensity 0-100%
Value 2 - Desired CCT Range

** Take note: There are two values that need to be entered.

o2-6.jpg

Step 6: Save preset to save the desired scene.

o2-7.jpg

Step 7: Select your new user preset from the main list.

o2-8.jpg

Step 8: Press Program button.

 
 

Step 9: Place phone within 1” of VintageDim® module. Phone will play a tone when programming begins. Programming is complete when you hear a single beep and see the “Programming Successful” screen.

If the driver was off during programming, simply power on and the driver will work according to the new program. If the driver was on during programming it will need to be power cycled for new programming to become active.

program.jpg

* Lid of driver case must be removed.


OPTION 3: Two Channel Individual Control

o3-1.jpg

Step 1: Select “Two Channel Individual Control“ factory preset.

o3-2.jpg

Step 2: Press Edit a copy.

o3-3.jpg

Step 3: Change the pre-set name to your custom name.

o3-4.jpg

Step 4: Set limits to CCT Range of Light Source. You must enter the CCT values of your light source.

o3-5.jpg

Step 5: Set values:
Value 1 - Intensity 1 Channel 1 - 100%
Value 2 - Intensity 2 Channel 2 - 100%

** Take note: There are four values that need to be entered.

o3-6.jpg

Step 6: Save preset to save the desired scene.

o3-7.jpg

Step 7: Select your new user preset from the main list.

o3-8.jpg

Step 8: Press Program button.

 
 

Step 9: Place phone within 1” of VintageDim® module. Phone will play a tone when programming begins. Programming is complete when you hear a single beep and see the “Programming Successful” screen.

If the driver was off during programming, simply power on and the driver will work according to the new program. If the driver was on during programming it will need to be power cycled for new programming to become active.

program.jpg

* Lid of driver case must be removed.


OPTION 4: Custom Curve (Dim to Warm)

o4-1.jpg

Step 1: Select New Preset button.

o4-2.jpg

Step 2: Enter the preset name and preset description.

o4-3.jpg

Step 3: Set limits to CCT Range of Light Source. You must enter the CCT values of your light source. Tap into the dim curve window.

o4-5 2.jpg

Step 5: Select “Edit Curve” at the top of the screen.

Select the dots on the intensity curve (red line) and use the arrows in the low right hand corner to move them into the desired position. The X Axis is control voltage and the Y axis is intensity. Values for the points may also be set by using the dialog boxes in the upper left corner. Repeat for each plot point on the line until the desired curve is achieved.

Use the toggle in the right corner to switch to the CCT Curve. Using the arrows, move the plot points on the yellow line to the desired positions. This time the Y axis indicates CCT. Again, the values for a given plot can also be set using the dialog boxes in the upper left corner.

Once the desired curves are set, tap the “Done” button in the upper left corner, then tap the green check box in the upper right corner and tap “save preset” at the bottom of the screen.

o4-7.jpg

Step 6: Select your new user preset from the main list.

o4-8.jpg

Step 7: Press Program button.

 
 

Step 9: Place phone within 1” of VintageDim® module. Phone will play a tone when programming begins. Programming is complete when you hear a single beep and see the “Programming Successful” screen.

If the driver was off during programming, simply power on and the driver will work according to the new program. If the driver was on during programming it will need to be power cycled for new programming to become active.

program.jpg

* Lid of driver case must be removed.


Troubleshooting

Program didn’t take or didn’t take correctly.
Power down the module and power back up. If it still doesn’t work try programming the module again.

Range is not what I expected.
Double check that your luminaire CCTs match your light source specs. Also, verify that you have set the CCT range as intended.

Lost Power to the job site.
The program in the driver will work as normal when power is restored.